• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Question... NO



we did that at a garbage co i worked at, the lot was all dirt, we got truck load after truck load and spread and rolled it out. the garage area they did extra nice and seal coated it, with home depot raceway driveway sealant. looked damn good.

the rest of the lot we washed down with a fire hose.
 
Yeah Sealcoat Works real good one guy I know used Sealcoat cut with diesel to soak into the asphalt let it cure for a little while and then seal coated on top
 
is this crushed asphalt easy to come by, and how much does it cost? I have a gravel driveway that needs a bit of help.
 
it tends to be free or super cheap, you only seem to find it when your local roads are being re done as far as i can see. unless you can find some local dump truck out fit that hauls millings. what we call it here. who knows what they call it west of the old miss lol
 
Scottydoggs said:
it tends to be free or super cheap, you only seem to find it when your local roads are being re done as far as i can see. unless you can find some local dump truck out fit that hauls millings. what we call it here. who knows what they call it west of the old miss lol
Click to expand...

I'll have to ask around
 


I have had my metal elbows in for a year and a half
I never had a problem until this weekend. I noticed a little coolant on the lim below the vacuum T.
Also the coolant level was down a bit.

I am thinking it might have been from hiiting a nasty heave in the road, jarring it a little.
I have checked everytime i have driven it and nothing since. Bugs the piss outta me.
 
The die cast aluminum elbows need to have the O-rings removed and the casting flash in the O-ring Groove cleaned up
Otherwise they seem to leak a little due to slight misalignment in the die parting line
 
SgtMarshal said:
is this crushed asphalt easy to come by, and how much does it cost? I have a gravel driveway that needs a bit of help.
Click to expand...

It cost me $290ea delivered for "about" 27,500lbs. The first pic was load one, the 2nd pic with the big mound was 18 wheeler #2. So $21 per ton give or take delivered.



I am gonna have to try this seal coat thing, getting me all excited.
 
the smoother you can get it before hand the better, like drive the piss over it on a few hot days with a loaded truck, you need to get every where not just the path you take, or you'll have ruts fast.
 


Didnt do anything today so I got bored and started touching things.

SOOO I delete the cruise control box
20160726_160433 by Corey S, on Flickr

Then saw my collapsed air filter, ***** little filter cant handle me
20160726_160558 by Corey S, on Flickr


So because I dont have a/c I relocated the pcm to the inside frame and started cutting. If I find this fcking die grinder that keeps evading me somewhere I can finish up the hole and go from there. I shall call it my deep turbo fender intake with muuuch bigger filter one day
20160726_160446 by Corey S, on Flickr
 
looks like it got beaten in on one side, sure it's not hitting anything inside there?

lol and that's alot of leafes all over. you should clean it.
 
Above the hole it where that filter has spent its life, nothing to hit but itself


The leaves I thought about it, then decided meh. Ill shop vac it eventually
 
huh. ***** little filter then. lol

lol I can't stand having crap in the windshield vents, makes the A/C smell funny. I need a new cabin filter lol
 


You must log in or register to reply here.
Back
Top