• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Question... NO

spit and bubble gum comes to mind lol

just whats holding that fitting to the pan? can you unscrew it and roll the hole back to shape?
 


02 camaro lim is kind of a pita, dam factory engine brackets. That and my brother giving me upper injector orings for the bottoms and took me 1hr to figure out why I couldnt dam the injectors in the hole

He wanted to paint it, dam dirt soaked engine, such a pita to clean
20160227_152838 by Corey S, on Flickr

I bet your enjoying that bracket with 2 bolts looking at the firewall aint ya bro!
20160227_124504 by Corey S, on Flickr

This is taking to long, time for a break, gp is soaking up the rays for no apparent reason
20160227_125036 by Corey S, on Flickr

Walla. I did forget to hook up the alternator he was about to drive away and asked me why his gauge was in the red lol. Quick reconnect and a jump start and he was on his way. I have 23 cuts and tears on my hands dam cowl.
20160228_163636 by Corey S, on Flickr
 
engine accessories like CAKE! back vc bolts, upper intake back bolts,fuel rail, fpr is in the back, map sensor all a *****!

I feel like I could do the gp's in 30 seconds after this thing.
 


As for the pan I punched the metal back around the fitting and black rtv'd it, ya ya. I am allowed a temp half ass at least once on the car.

Let the engine warm up to temp, no gas smell check, drain check.... small puddle of oil forming not check.
Jacked it BACK up, too tire off and while running found the leak. Turbo FEED line plug was dripping minimum 1 drop per 2 seconds, no idea how long this was going on, gravel driveway sure as hell dont show me anything.

60% of the spill was because I took the plug out and it drained the feed line
20160306_161110 by Corey S, on Flickr

Cleaned the copper rtv off, cleaned the hole and after some browsing the web settled with this
20160306_160635 by Corey S, on Flickr
20160306_162106 by Corey S, on Flickr

I will let it rest of today and monday and find out tuesday. Looking at the pic, my guess its been doing it for a while haha
20160306_162606 by Corey S, on Flickr
 


Car greeted me as I walked past it this morning. New pan it wants :rolleyes::th_tongue2::th_angry2::th_lipssealed1::th_depressed::th_shakinghead2:
Maybe I can drive it again in april.
20160307_092203 by Corey S, on Flickr
 


20160317_145208 by Corey S, on Flickr
20160317_145223 by Corey S, on Flickr

New pan all done up
20160317_134740 by Corey S, on Flickr
20160317_134748 by Corey S, on Flickr

Shouldnt be breaking this anytime soon!
20160317_134813 by Corey S, on Flickr

Scottys way is better
20160319_173735 by Corey S, on Flickr


Hello
20160319_173840 by Corey S, on Flickr

Hi piston
20160319_173854 by Corey S, on Flickr

Scotty the chain says "sup"
20160319_173924 by Corey S, on Flickr

20160319_181936 by Corey S, on Flickr

Wo hoo
20160319_182010 by Corey S, on Flickr

Oldd
20160319_182101 by Corey S, on Flickr

Oops
20160319_182111 by Corey S, on Flickr

Atleast the old pan came off the fitting!
20160319_182846 by Corey S, on Flickr


pans torqued, tmw put bracket and mount back on then I HOPE to drive it again
 
Back
Top