• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Question for the meth-heads



Never had a problem out of mine either. I think Nick was under the hood one time when I didn't have the line plugged into the nozzle, and when I blipped the throttle, he got sprayed pretty good. LOL
 
JoshMcMadMac said:
Which check-valve? The black plastic one, or the metal one? They were both installed the proper direction, and there was flow, but the black one is a huge restriction compared to the metal one.
Click to expand...


black plastic check valve? My kit didn't come with anything of the sort. I just have one check valve and its connected to the 90 degree elbow at the nozzle. Heres a pic....

Picture067.jpg


I'm of course running a DO kit. I've found no restrictions with or without the check valve. I primed it both ways before installing in the TB...
 
BTW, what fluid mix are you runnning? I'm running 50/50 water/meth DO brew currently. I still need to tune mine sometime. I'm running 10.7-11.0 on my wideband...
 
I am running the brass check-valve like you have. Bio included a black plastic one as well, so I tossed it inline near the nozzle, and I believe it was a source of restriction.

Right now I am just running -20 washer fluid. I am interested more in cooling and quenching knock over octane and running richer...plus I figured this was an easy place to start and I can step up more later if I want to.
 


You must log in or register to reply here.
Back
Top