• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Question about LTFTs

machinegunsquid

machinegunsquid

New member
Just got done installing my WBS intercooler on the car. I ended up deleting the EGR and I am currently still running a stock PCM. (I've got an Intense tuned PCM ready to go in once I get my injectors)

At idle with the engine cold, LTFTs are around -15 to -16.4 bouncing around between those two values

At idle with the engine at operating temp, LTFTs stay around -10 to -12.

Normal driving they bounce between -5 to -11

Cruising at 60mph it will stay around -10.5 to -11.1

WOT stays at 0


No vacuum leaks, no exhaust leaks.

STFTs stay between -2 to +3 at all times, and stays at 0 during WOT.


My question is; Are my LTFTs wacky due to the EGR delete, or is there possibly something else going on?
:hm:
 


It might not be a huge vac leak, but it's possible with the IC.

Those are some pretty beefy trims, lol.

Are the MAF tables correct (i.e. matching year MAF/TB)?
 
I know I'm running rich.

Vacuum is between -22 in/hg to -19in/hg fluctuating with the rpms.

PCM is stock. Not been messed with at all. Running a stock L67 MAF and TB.
 
the intercooler is giving you a lot more headroom with the fueling and the stock tables are way off now. you're running rich.
 


My XP car idled between -15-17 in/hg~.

That's not too far off, but yes...stock car idles around -20~ give or take one or so. Cam doesn't make THAT much of an impact.

It needs tuned too. Get wideband :)

Until then, throw on a 2.8" and let me race you in a really slow car.

Also, what about an exhaust leak? How'd you seal the IC? Is the PCV working?
 


But I like my 3.8 pulley. We've been together for so long.

Car had an exhaust leak at the crossover. Got it welded and no more leaks.

IC is sealed with RTV, top and bottom.

Breather on the front, PCV is working fine for the rear.
 
Have pictures
IMG_20140107_240521_609_zpsbf05af16.jpg


IMG_20140107_241236_096_zps75d84733.jpg


Though I had a good pic of the PCV setup. Drilled and tapped the brass plug in the TB, got that running to the Gen V PCV port.
 


You must log in or register to reply here.
Back
Top