• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Pulley dropping, got a question on belts

OH4CompG

OH4CompG

New member
Any 04+ guys out there running a 3.6 pulley, what belt are you running? I understand stock should still work but my belt is starting to crack so I want to replace it with a new one, and would like to get the tightest belt I can run on it. The stock s/c belt on the 04+ is 67.5 inches and napa sells the gates k060667 at 67.25 inches and the K060660 at 66.75 inches. I've had guys tell me I should run the 660 but that is coming from people that own pre04 gp's and have a smaller belt to start with. Stock gen 3 belts are a half inch shorter than the stock gen 5 belts. So, what are you guys running for belts on 3.6 pulley's?
 


You must log in or register to reply here.
Back
Top