SgtMarshal
Active member
If I run a stock unmodified gen 3 with the stock throttle body, 1.9 yella terra roller rockers, local shop ported heads and headers will I have flow issues from the stock intake?
pulley drop
- Thread starter SgtMarshal
- Start date
ADrugDealer
Schooner Tuner
Stock airbox or air intake tubing? Clarify please
SgtMarshal
Active member
I took the air box off and I am just using the accordion like intake tubing with a K and N filter on the end of it
Fivefingerdeathpunch
New member
Will it be too small, no.
Can it cause turbulance from the baffles, yes. Its best to not have baffles.
Can it cause turbulance from the baffles, yes. Its best to not have baffles.
SgtMarshal
Active member
What about the restriction from the size if the throttle body and gen 3
ADrugDealer
Schooner Tuner
I ran the stock tubing all the way down to a Cam and 2.8 pulley.
SgtMarshal
Active member
Stock throttle buddy and unmodified lim and supercharger case too
Fivefingerdeathpunch
New member
Most will never outflow the ability of the stock throttle body. You'd need to be pretty modded to be taking in more air than the TB could handle.
ADrugDealer
Schooner Tuner
Intercooler cut lim, stock l32 TB, stock gen v
coolone
New member
Are you getting the heads for free? Why would anyone improve flow in only some parts of the intake? If you're having heads worked over, then it's a waste unless you make the entire intake free flowing! Ported TB and SC may not add any POWER, BUT I can attest to a very nice improvement on throttle response! : )
Good Luck no matter what you do and enjoy your ride!
darkhorizon
New member
LOL, we have some fluild dynamics engineers here i guess.
OP, answer is your intake is fine.
Fivefingerdeathpunch
New member
Trust me, I'm a doctor.