• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Ps return line install

S

Stone 316

New member
I hv an 08 gp and i removed the return line in 3 seperate pieces. I tried putting the new line on and after cursing so the neighbors can hear and counting to 5 before taking a hammer to the closest thing..... i tried removing the tire rod and sway bar end link but not the bushing....
Can anyone give me any advice plz..... i tried and im gonna quit til i get some guidance
 


I watched several utube videos and posts but doesnt tell me how to route the return line.... from underneath or passenger side i tried many different ways
thanks
 
my 98 regal the metal part of the line clips to the sub frame. iirc both lines are clipped there. they do a silly loop at the frame area.
 
Mine go on top of the cradle from the flex line at the pump just below the pump to the front and a 90 bend following under the rad and back to the rack. From underneath the pump to the rack it goes under the cat to the rack....... my problem is i have no clue how to feed it in or from what angle. Almost seems impossible lol
 
Any info on how to put the line in place would be much appreciated. I tried putting it in place thru the passenger side but doesnt look like it will go.
Thanks
 


I watched that one among others..... i was looking for a way to get that line in but there really isnt one lol... just lots n lots of patience and time. I got it in, had to cut the pump end line, it was too long.
The nut into the rack is a different story tho.... already lost the oring. If it fell inside the rack could it hurt anything?? Like melt and clog something??
 
You must log in or register to reply here.
Back
Top