• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

project 12s buick (headers, 3.4, and tune coming now!)





Re: project 12s buick (engine tear down)

i have tried. i might just cut the spring sections at a time and see how it turns out worst come to worst i get new springs
 
Be careful when cutting springs you take a chance then again if you want it lowered it might be your only option unless you go custom.
 
Just going through the link I posted did you even take a look at the thread....


"i believe the best option for the lowering springs are Deville Lowering springs. The Deville and the Bonneville share the exact same underpinnings, where as the STS is sightly different"
 


Re: project 12s buick (engine tear down)

I'll ban you from BonnevillePro as well as here if you start cutting springs instead of reading up. Make sure you read Oldsman104 posts. He had a Riviera and did a ton of reaserach. Riv and PA are basically the same.
 


You must log in or register to reply here.
Back
Top