• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Problem changing supercharger oil.

B

Btownmills

New member
Well, I went to change my supercharger oil and I can't seem to get the bolt off of the supercharger. I'm using allen wrenches and none seem to fit right. Does anybody know what other options I have?
 


I assume its a metric size.

Are the corners rounded? If so, it may be time to use an extractor.
 
It should be a 3/16 allen key IIRC. Make sure the Allen Key is all the way into the bolt before attempting to turn, you dont wanna keep stripping tools. Mine was a but tough to get loose so i just put a closed end wrench on the end of the allen key to get leverage.
 
Depends on the size of the allen head. I don't recall what size it is. Most large hardware stores should sell single extractors of the right size.
 
mine is a torx bit. looked like a Allen but after cleaning it up the points showed. i think it was a t-35 or t-40 not sure tho.
 


You must log in or register to reply here.
Back
Top