• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

prj fuel rainl/ injector help

Taz Magister

Taz Magister

New member
so I installed them they leaked I started changing injector o-rings with the o-rings zzp sent me for the swap but the o rings almost seem smaller than the old ones and when its all bolted down I can rotate the injectors I havent tried turning the pump on but do you need special O-rings for these rails or something
 


Punctuation, for the love of god. Get bigger o-rings. Or get smaller fittings from Xtreme Racing Plumbing.
 
nope stock o rings. injectors are able to rotate when installed, thats normal. just make sure the orings didnt get pushed out of the side or anything.
 
I've always just used regular Felpro's. I think they are ES70599's. Whatever it calls for on our cars. Put them on, then lube them up with vasoline. Slide injecftors into rail and rail onto motor. Bolt down.
 


alirght one of the o-rings was defenitly bad but while swapping them I noticed that the second nut on the hose connection don't know what its called was losse on the front and back rail so that might have had something to do with it
 
ok so I hooked it all up and now the only leak I have is where the hoses go into the regulator adaptor will thread sealant hold up to gasoline?
 
You must log in or register to reply here.
Back
Top