• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

pre drilled holes under plastic speaker holder

J

Jeffintampa

New member
Hi everyone merry christmas,
I am installing my daughters system in here 02 GP and put the new ones in the plastic risers and cliped back in, I notice holes pre drilled to further anchor the plastic riser, any one know what size the screw that can be put in to lock the Plastic riser down tighter

Thanks
Jeff
 


Hey what do you know, the screws that came with the speakers fit the hole and hold the plastic riser tight, do you all install you new speakers in the risers, or omit and mount to metal?
 
They did and I have the risers screwed to the steel feels pretty solid. Any one know what that little power wire is that comes out of the third brake light, I have a small 2 wire cord with a plastic plug in comming out of the third break light comes on with the key
 


I wouldn't trust it as enough current to support a very big amp. You could use it to turn the amp on. For that amp even that small I would still suggest at the least 8ga power and ground wire.

Sent from my XT1080 using Tapatalk
 
You must log in or register to reply here.
Back
Top