• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

power cable from batt

Status
Not open for further replies.

flipzat

New member
where is the best place to drill a hole or is there a hole there already to put a 4 gage power wire though ? also any ideas of how many feet or power wire i need to reach to the trunk i dont wanna be short or to long as its $$ for wire buy the foot
 


under the passenger side carpet there is a gromet going threw the firewall as for feet of wire I can not help ya there all I can say is better long than short.
 
I don't know if a 4awg wire will fit through there or not since I put 8awg. Measure your car from bumper to bumper and that should give you a good estimate as to how much wire you will need. I tried piecing everything together and realized I had spent more than if I had bought an amp wiring kit.

Since My GP didnt have binding posts on the battery, I attached the power wire to the jump starter bolt on top of the fuse box. My lights dimmed a lot even with a 2.5F cap. After I did the alternator rewire (running a wire from the alternator to the jump starter post) the lights where almost normal.
 
Status
Not open for further replies.
Back
Top