powder coating my CB750 wheels

[Bio248]

so i am powder coating my CB750 wheels coming up soon. i already picked out a color (darker, flaky red). don't try and help me pick a color because i already picked on out. i don't care what color you think they should be, either.

here is what the wheels look like (not my image):

they're spoked wheels and they need to be disassembled before powder coating.

the question is:
a) powder coat the rim, hub, and spokes?
b) powder coat the rim and hub (spokes would be chrome)?
c) powder coat just the rim (hub would be cleaned up, chrome spokes)?

this is the color i am using: Prismatic Powders: PPB-4694 SUPER RED SPARKLE .

so like i said, this is a question of WHERE, not WHAT COLOR. don't be a dick.

 

[matt5112]

b or c with polished hubs.

 

[burgundybullet]

I'd definitely avoid doing the spokes if at all possible.

 

[Bio248]

polishing the hub takes time that i don't want to do. the brakes also hide them a fair amount.

 

[Oxfire]

Powder Hub and Rim. That's mah vote.

 

[matt5112]

polishing the hub takes time that i don't want to do. the brakes also hide them a fair amount.

If the brakes hide, then c would is fine as described.

 

[REDCRAPGP]

C ...

 

[Bio248]

i am leaning towards just the rim, as well...

 

[machinegunsquid]

Rim and Hub, and clean up the spokes/new ones.

Color looks tits by the way

 

[Below Average Joe]

I would go with C if it were me

 

[87IROCZOWNER69]

C....although I think you might like the look of plasti-dip alot better

 

[matt5112]

C....although I think you might like the look of plasti-dip alot better

Quoted just in case bio misses this.

 

[Bio248]

oh, i didn't miss it.

 

[Neil98gt]

I vote c.

 

[Nickell]

B or C, A in my opinion would be over-kill and blend together too much

 

[LS1GTP]

Next person that says to plasti-dip them is probably going to get an infraction, haha.

Go with option C.

 

[magnus]

rims red, spokes black, drill out a couple holes in the brake for venting and polish em. ive seen it done on a few cafe cl350s. looks nice.

 

[Bio248]

done and done.

thanks for the opinions, all.

 

[87IROCZOWNER69]

oh, i didn't miss it.

Dang, I figured I could get a rise out of you.

 

[blueguy]

D) Rattlecan/plastidip combo.