BillBoost37
New member
Re: Random Thought Thread 2.0
Yeah...maybe you need a bb gun to hang on the wall...
Uh..crazy..good description
Yeah...maybe you need a bb gun to hang on the wall...
Uh..crazy..good description
POST WHORINGZ THREADZ!11!!1!one
- Thread starter matt5112
- Start date
- Status
Below Average Joe
New member
Re: Random Thought Thread 2.0
Other than the LIM gaskets and oil and filter for a change what else do I need for the LIM gasket change? I am also ordering elbows too
Other than the LIM gaskets and oil and filter for a change what else do I need for the LIM gasket change? I am also ordering elbows too
TLSheff
New member
Re: Random Thought Thread 2.0
Since you got it apart I would suggest
LIM gaskets
Oil/Filter
Elbows
Valve cover gasket and new grommets
Fuel Injector O-rings all around
Throttlebody gasket
Inspect the plenum, make sure its not cracking around the coolant ports on the TB
Clean nasty dirty inside of TB
Since you got it apart I would suggest
LIM gaskets
Oil/Filter
Elbows
Valve cover gasket and new grommets
Fuel Injector O-rings all around
Throttlebody gasket
Inspect the plenum, make sure its not cracking around the coolant ports on the TB
Clean nasty dirty inside of TB
Below Average Joe
New member
Re: Random Thought Thread 2.0
Why would I need new valve cover gaskets if they are not leaking? After ordering the LIM Gaskets, elbows and a windshield washer pump for the Venture I only have about $40 to spend on oil, filter and other misc. parts before winter comes. I am only doing what is necessary right now.
Why would I need new valve cover gaskets if they are not leaking? After ordering the LIM Gaskets, elbows and a windshield washer pump for the Venture I only have about $40 to spend on oil, filter and other misc. parts before winter comes. I am only doing what is necessary right now.
BillBoost37
New member
Re: Random Thought Thread 2.0
Plug coolant ports...
Plug coolant ports...
Below Average Joe
New member
Re: Random Thought Thread 2.0
explain.....
explain.....
loopy smurf
New member
Re: Random Thought Thread 2.0
I think the machine that makes Reese's Peanut Butter Cups needs a tune-up. Just opened one, and it had 2 of the little paper cup wrappers, and the one side was all peanut butter...like it's off center or something. VERY disappointing. I might write a letter...
I think the machine that makes Reese's Peanut Butter Cups needs a tune-up. Just opened one, and it had 2 of the little paper cup wrappers, and the one side was all peanut butter...like it's off center or something. VERY disappointing. I might write a letter...
BillBoost37
New member
Kolton Lock
New member
Love skipping school 
ctracer
New member
Kolton Lock
New member
Butbutbut!
Below Average Joe
New member
Re: Random Thought Thread 2.0
sounds interesting, but I don't think I will be doing this
sounds interesting, but I don't think I will be doing this
BillBoost37
New member
Re: Random Thought Thread 2.0
Then a new manifold should be in your future.
Then a new manifold should be in your future.
Below Average Joe
New member
Re: Random Thought Thread 2.0
if I were to do this, blueguy said to get a L32 UIM since it is nto plastic. that sound about right?
if I were to do this, blueguy said to get a L32 UIM since it is nto plastic. that sound about right?
BillBoost37
New member
Re: Random Thought Thread 2.0
Not at all..
L32 UIM is a Gen V M90 Supercharger. I mean..it might feel right, but you want an L26 or just plug the holes. If you plug the holes, it'll cost you like $3 plug borrowing a tap and drill from a buddy. New manifold last time I checked was $85, and an L26 aluminum upper is usually $40 plus the adapter $100.
$3 for plugs or
$85 for a new plastic pos or
$140 for L26 aluminum
I'm a cheap ahole with a drawer full of plugs. :th_king-evil:
Not at all..
L32 UIM is a Gen V M90 Supercharger. I mean..it might feel right, but you want an L26 or just plug the holes. If you plug the holes, it'll cost you like $3 plug borrowing a tap and drill from a buddy. New manifold last time I checked was $85, and an L26 aluminum upper is usually $40 plus the adapter $100.
$3 for plugs or
$85 for a new plastic pos or
$140 for L26 aluminum
I'm a cheap ahole with a drawer full of plugs. :th_king-evil:
Below Average Joe
New member
Re: Random Thought Thread 2.0
thats it, i was wrong on my numbers
thats it, i was wrong on my numbers
Below Average Joe
New member
Re: Random Thought Thread 2.0
you make a valid point Mr. Boost
the gaskets and elbows have been ordered and maybe i will plug the holes, but do I need to "hog" out whatever you say to hog out or can I get by with just plugging the holes?
you make a valid point Mr. Boost
the gaskets and elbows have been ordered and maybe i will plug the holes, but do I need to "hog" out whatever you say to hog out or can I get by with just plugging the holes?
- Status