• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

porting

BoostJunki3

BoostJunki3

Needs A Turbo
what supplies will i need to home port my blower and TB? and where can i get em thanks! gtp is down for a couple weeks and i need something to keep me busy.
 


Inlet or outlet?

Plan on a die grinder, extended carbide bits, flap wheels, dremel, sanding rolls for the very minimum. Ideally you would want to machine the inlet and outlet but if you dont have the tools...
 
minichopper6hp said:
Inlet or outlet?

Plan on a die grinder, extended carbide bits, flap wheels, dremel, sanding rolls for the very minimum. Ideally you would want to machine the inlet and outlet but if you dont have the tools...
Click to expand...

just wanna open up the outlet remove the hbar and open up the LIM....
 
A bit and a dremel :D

You could use a 1/2" drive bit/dremel and it wouldn't be that terribly slow.

And why would you want to remove those things?

Is your blower ported already?

Planning on going I/C'd?
 
You must log in or register to reply here.
Back
Top