• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Port and polish



Yeah it's not worth it to port and polish a GEN V, it will likely only make it perform worse.

As for powdercoating, they has to be somewhere within 30 miles of you that does it. If you live by any bigger cities.
 


31e1672c09ad3bb7f239d6d5bdd69a9927420a96.pjpg
 
Oh ok i understand. Most powdercoater do that rite. Do i disassemble the supercharger prior to the powdercoating. One last thing who would happen to rebuild superchargers and shave the snout to run smaller pulleys
 
Yes you would take it apart completely. You can get a snout machine tool from ZZP for a rental fee and just use that. As for a rebuild, you need a hydraulic press so I think most just buy a reman snout.
 


If you plan on running something smaller than a 2.7in pulley on there, then worry about machine work on the snout. You'll never go that low, thats some pretty extreme modding if you think you'd need to spin that thing that fast.
 
Thanx guys for the input. I found a gen v at the jy so i got it. Rotors are coated pretty damn good. I shouldve gotten the lim but didnt bring much as far as tools so if anyone has a lim layin around let me know
 
you didnt have a 3/8 th socket and a 13 mm? go back and get that. be cheaper from the jy then bought and shipped.

or just cut your gen 3 lim hole larger.
 
Scottydoggs said:
you didnt have a 3/8 th socket and a 13 mm? go back and get that. be cheaper from the jy then bought and shipped.

or just cut your gen 3 lim hole larger.
Click to expand...

This! It's easy enough to to remove and shouldn't cost to much.


Sent from my iPhone using Tapatalk
 
Believe it or not i didnt go out there with any tools. I went to the jy to find seats for my 90 xr7 and happened to see the l32 in the jy. I will go back out there this weekend and grab it off if its still there
 


Sorry to change subjects a little bit, but how hard is it to PnP a M90 blower? And what gains could I realistically expect to get from doing this?
I'm getting ready to put a N* TB on and I have a CAI. What else should I do to let the engine breathe that much better? Thank you for help and support.
 
The gains are already made by switching to the Gen V, it's a ported GenIII, lol. If you want bigger gains you'd have to Whipple it!
 
You must log in or register to reply here.
Back
Top