• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Pontiac man from way back.

jeffross51

New member
Hey folks first time here and already need advise. I have a project going pulling the engine from a Grand Prix. I pulled all the bolts out and can't get the engine to separate from the tranny. Need a little help if you please.
 


There is 3 areas to check.
Did you get the "backwards" bolt? The bolt head is on the engine side not the trans side. You can see it looking down the trans from the passenger side wheel well.

2. Did you take out the torque converter bolt

3. Did you take off the bracket that goes from the trans to the engine. (by the oil filter)
 
It is also way easier to put the reverse bolt back in form the passenger side wheel well. Just need about 3' of extensions. (well worth the investment)
 


Back
Top