• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

plug suggestion

nicks98gtp

nicks98gtp

New member
Hey guys, Ive read through about every single spark plug post and I cant come to a solid conclusion. Recently I started getting a miss during WOT runs about midway through the powerband. It hasnt set any engine lights or anything but when the motor was built I put copper plugs in it which I hear go bad fairly quick. I just bought some Bosch Platinum plugs but after reading around on here Im not sure if i want to throw those in now. Im stock besides a ported S/C and an aftermarket PCM. Are the autolite 606's a decent plug at this point in time or is there something better out there? thanks in advance
 


the only downside is I dont have any way to scan the car right now so I dont want to try and get to cold of a plug or experiment around until im back to school. But food for thought thanks for the input
 
ended up going with the 606's and im satisfied so far. My miss is gone and it feels like i gained a little power back, the old plugs were pretty trashed but they were copper and had roughly 11k miles on them
 
I’d say you made a good choice, you want to run the hottest plug you can. The closer to stock heat range the better IMO. Your tune might like the 605s better, you might want to check your KR sometime;) :cool:

The 104s would come into play if you start changing pulleys.
 
Last edited:
ill be back in school tuesday so ill be able to scan again, but the smaller pulleys are coming lol. hopefully by next winter itll be where I want it to be
 


You must log in or register to reply here.
Back
Top