• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

plog info needed

Dustoff

Dustoff

New member
so im getting a used zzp plog and I don't have any gaskets for it. can I go to napa or gm and get stock gaskets and use them? im assuming once I pull all my old crap off everything will be un safe to use?

also would my muffler shop be able to fab up a catless down pipe and u-bend delete? or do I have to buy these things from zzp?
 


ok sounds good. now its just the plog and I only have my stock DP so i should get a 3" DP before i install?
 


ok, 1 more question, should i use RTV?

i lied, 2 questions....

if i get my shop to do a u-bend delete is the stock DP still going to restrict badly?
 


clean that crap off, if its there put it on dry.

when you take the front manny off the 2 end studs they hold the gasket to the head. i left them there, and put my headers right on. its a thin metal gasket.

same with the dp gasket to the rear manifold. you can re use that one. the cat back gasket will likely need to be replaced.

start spraying the crossover pipe bolts, and the dp bolts with pb blaster or something to help them break free with out snapping.
 
got the plog, what should I clean it out with or should I even bother? scored shorter dog bone and a 3.4 for $20 from the same guy!!
 


You must log in or register to reply here.
Back
Top