• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

pacesetter vibration

G

gotboost3

New member
hey guys just installed my pacesetters last night and i notice i get a shyt load of vibration in reverse....anybody know what this is or if its common ...should i try off set poly mounts maybe something touches in reverse?
 


found out its my oxygen sensor its sitting against the floor board/frame in reverse are there other oxygen sensors that are not as tall?
 
Yes, alot of 3rd gen f body guys use em.

flp(JOLIET i THINK) or speed inc(schaumburg off eoe and wright) shOuld have em or even SP( bloomingdale @ gary and army trail behind the turtle wax)
 
take off the sensor and whack at the bottom of the car with a hammer. that is what i did and now i clear it by about at inch. there is a bunch of room to work with between there and the actual floor, so i wouldnt worry about that.
 
Actually, a Denso is slightly shorter than the stock one. Or you can use the sledge hammer method. Whatever you feel like doing I suppose.
 


First off, Congrats, You have pacesetters.




The only thing it actually hit's is the heat sheilding. I took the sensor out and tapped in where it was hitting with a hammer.
 
Yeah it was. It's just that I have experienced about everything you can with those headers so I like to rub it in people's face that are having the same issues that I had to go through lol :o
 


You must log in or register to reply here.
Back
Top