pac swi x install help

[des19]

Hi has anyone installed one of these? It says to install the power and ground wires to any source. Okay easy enough. But then it says to install the green wire to the vehicle SWC wire? Does anyone know what this means? Can it be connected to any green wire source or does it need to be connected to a certain one??

the manual is here if this can help any one.. http://www.pfyc.com/supportfiles/swixinstr.pdf

 

[NegativeOne13]

Where is my trucks SWC wire located? - Yahoo! Answers

http://www.pac-audio.com/SWI/pdf/swi-x_application_guide.pdf

http://www.pac-audio.com/SWI/pdf/swi-x_connector_guide.pdf

http://www.pac-audio.com/SWI/pdf/swi-x_locatingwire.pdf

SWC = Steering Wheel Control

 

[des19]

thanks

 

[des19]

sorry about to do this install tomorrow...does the green wire at that connects to pin A7 have to be at the swc or can it be at the radio also???

 

[des19]

anyone???

 

[Compg4me]

I installed that on my old 99 prix and the wire was in the radio harness.

 

[des19]

I installed that on my old 99 prix and the wire was in the radio harness.

Do I need to cut the pin at A6 and connect it to a 12v or can I cannect a 12v directly to the harness without cutting? (for pac swi x)

 

[The Guz]

Find the wire on the harness. Cut it and splice it into the PAC wire. Tape it up and you are done.

 

[industrialfish]

Thanks! This just made my day easier. Searching GPF is better than Google sometimes.

The GMOS-04 doesn't come with that wire, but I pulled the Illumination wire out of B12 and snapped it into A7 since I'll be using the Dimmer wire.