• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

p1571 dtc. need help

2kblackgtp

2kblackgtp

New member
Ok so here is a little background. Wheel hubs went bad, abs and trac lights started coming on. Replaced the hubs, and my friend broke the wire for the wheel speed sensor going into the hub. Drove without it for 6 or so months. Finally got a new hub, and still a dtc. Figured the pigtail was corroded. Replaced the pigtail from the wire harness going to the wheel hub wire. Still has the dtc.

So I started really looking into the code and am a bit unsure as to what to do or what the prblem is. I know the code is for the drivetrain detecting a bad voltage from the traction control unit or something of the sort but I'm really as a loss. Should I break out a meter to see where there is a voltage drop? What are the likely problems or what probably need to be replaced? Also, is it possible to just delete the code so the abs and tcs off lights justgo away? I don't use either of them anyway obviously. Thanks in advance!
 


have the same issue on my car. ebtcm circuit no frequency. i was told my ground on my chassis could be dirty so i had them clean them and sand the paint off. it was fine for a day then my car started back jerking again. i thought it was my trans at first. but they said its the grounds or your ebtcm module is bad and its a 1000 dollar piece. or the ecu is bad. im like which one?? but ed morad is getn an email from me and i want a tune anyway.


and cash for clunkers is sounding real good right about now. but nawll i like my gtp.
 
You must log in or register to reply here.
Back
Top