jollimonn2
New member
Am getting error code P1441 canister purge problem
Anyone have same problem & definate fix?
Thanx, Jollimonn2
Anyone have same problem & definate fix?
Thanx, Jollimonn2
Last edited by a moderator:
P1441 Evap code
- Thread starter jollimonn2
- Start date
Be sure to post in the correct section and label your thread so that people know whats inside it.
As per here: http://www.grandprixforums.net/dtc.php
stuck purge valve prolly.
try a new one. they're pretty cheap.
As per this which is also in the "how to" section up top: http://www.grandprixforums.net/website/Docs/Grand_Prix_DTC/2000-L36-L67.pdf
So yeah, go buy one already lol.
As per here: http://www.grandprixforums.net/dtc.php
stuck purge valve prolly.
try a new one. they're pretty cheap.
As per this which is also in the "how to" section up top: http://www.grandprixforums.net/website/Docs/Grand_Prix_DTC/2000-L36-L67.pdf
So yeah, go buy one already lol.
I just fixed this same problem
One of the plastic vacuumm lines was cracked and sucking air.
There is a tee under the fuse box under the hood.(pass fender)
One line goes to climate control inside car.(controls air flow direction)
One goes to a canister behind the driver side headlight,
one goes to manifold.
Takes a few days of driving to clear the code on its own
good luck
One of the plastic vacuumm lines was cracked and sucking air.
There is a tee under the fuse box under the hood.(pass fender)
One line goes to climate control inside car.(controls air flow direction)
One goes to a canister behind the driver side headlight,
one goes to manifold.
Takes a few days of driving to clear the code on its own
good luck
jollimonn2
New member
Thank You for your info. Will check hoses.