• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

p0366

GOTIT4CHEAP16

GOTIT4CHEAP16

New member
Hey guys. I just finished putting a new engine in an impala an 04 impala and now its throwing the po366 and the rpm's kind of jump around a little. When i tried to give it some throttle a little from the engine bay it stutter a little some more.
 


So what's that code mean? Not being a jerk, but if you can post a thread...I'm sure you already looked up the description.
 
P0366 Camshaft Position Sensor B Circuit Range/Performance (Bank 1)

I'd check the wiring and if it's plugged in.
 
Ok so i checked the cam sensor and it was plugged in but as i looked near the coil packs i saw that the ground near the coil bracket was just hanging and not grounded.

IMAG0671.jpg


I then knew that had to be it. I grounded it and everything is good and no more code and running smooth.
 
You must log in or register to reply here.
Back
Top