• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Oil leak!!!!!

musiknjoyr

musiknjoyr

New member
ok so all of a sudden when i stop my car to go into my house i would smell coolant....crap.....but now i am losing oil and coolant. There is what appears to be oil sittin on both sides of my engine....please dont tell me lower intake gasket...please HELP!:th_nervous::th_nervous::th_nervous:
 


Yup probably LIM gasket. Have any milky stuff on the bottom of the oil fill cap? The LIM bolts will sometimes let oil seep up through them which you can use threadlock to stop and it could be the valve cover gaskets, but that wouldn't explain the coolant. The LIM gaskets are just way to common of a problem so... have fun ;)
 
lim for the win theres a write up with video on here for it its not that bad might aswell do the valve covers while its all apart
 
See I changed the gaskets about 10,000 ago. Would they have failed that quickly or could it have just taken that long to wear out a weak point?
 
musiknjoyr said:
See I changed the gaskets about 10,000 ago. Would they have failed that quickly or could it have just taken that long to wear out a weak point?
Click to expand...

They shouldn't have, but if you used the plastic ones (like I did b/c I didn't know about the aluminum ones yet :th_tongue2:) then it's very possible. You could try to give it a thorough inspection, but if you don't see anything obvious it's gonna be the LIM.
 


I'm new here but I just recently went through this, Dorman makes an aluminum updated gasket for these engines at a good price. Includes all and I mean all! gaskets neccesary(did I get that right neccesary) LOL any way,to do the job inc. LIM bolts. for the 3.1 or 3.4 engines the part # is 615-205 a good place to get this kit is www.ecaronlineusa.com besides the job is fun and educating if ur new to it. Hope everything works out 4 ya.
 
Go to zzperformance.com and look under gaskets, they have the aluminum ones for around $55. I think some part stores have them. Its definintely the best way to go, I've been thinking about replacing mine with the aluminum ones and I just put in plastic ones :th_laugh-lol2:
 
^dorman aluminum, SWEET cuz thats what i ordered from my goto (rockauto :th_thumb-up:) also noticed that i may have been looking at old torque specs, back when they were like 115 for all :th_shakinghead1:
 
You must log in or register to reply here.
Back
Top