• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

No MIL light

Not sure, it looks like you'll have to remove the current bulbs from the base and see if those will fit in the base.
 


Well, I think I'll order those LED jobs and give 'em a try. They don't cost much. They'll outlast the car, and they use less current. 90ma vs. 17ma
 
In the electrical field, "T" means tubular, and the number is diameter in 1/8" increments. That's for flourescent lamps anyways. Maybe this is something similar. I also read the the 194 is 3.25. I reckon the wedge base is the same. My eyes tell me that this cluster bulb is a little smaller that the ones I put in the DIC yesterday, which were 24's from O'Reilly's. But I have to order some sockets too.
 


Good advice, if i was in a hurry, but this is my son's car and he can cry 'bout it for a few days :rolleyes: while I try out those LED's. With the LED, current is a lot less so that's not a factor, smaller and less heat so those factors are ruled out. They fit in the same wedge base. But the main issue is: What to do about the ABS/TRAC OFF light problem . . . . . .
 
I saw an outfit on the web that sells rebuilt ones for about 65 plus a core charge. I'll have to go that route maybe.
 
You must log in or register to reply here.
Back
Top