• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

nitrous

redlinepontiac

redlinepontiac

New member
tried searching for a write up, couldnt find one.

anyone on here have a nitrous setup? i need advice on how to install, looking at the zex "smart" kit.

if you dont like nitrous, keep your b.s. to yourself
 


better plan on the wet kit. change to some n20 friendly plugs. then theres not alot too it. wire your arming switch, use a micro switch to activate the solenoids. (WOT) switch run a line off your fuel rail to the fuel sol, then the one from the bottle goes to the n20 sol. then pic where and how you want to mount your nozzle. makes sure its after the maf. then dont jet it to a tiny shot until you can get it tuned to run something bigger.
 
Last edited:
thanks that what i was looking for,

not a specific question, more where someone mounted their solinoids and ran lines, wires. etc
 






need to? no...

better? yes...

especially for nitrous... that way you dont have to tap the blower and can put the jet in front of the TB if you want... just have more options ya know?
 
You must log in or register to reply here.
Back
Top