• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Nic Cam Compression Ratio

R

Roadwarrior

New member
Hey currently rebuilding my l67 for my 2000 GTP Im trying to decide compression ratio with a NIC Cam? 8.5:1 or 9.9:1 I will be using JE Forged pistons the block has been lined honed got ARP main studs and King xp Main and Rod bearings along with l32 Rods. Im running a double roller chain and 136 valve springs I also have a Gen V feeding a stage 2 Intercooler and Pacesetter headers. My question is what kind of pulley can I run with the higher compression or should I stick with the lower compression and up the boost?
 


That^^

Pulley size is going to depend on what fuel you're running and how well your intercooler works.
 
In only have 94 available in my area But I also have Meth Injection... Just trying to get some idea of what pulley can be run with this cam and higher compression.
 
im on a 2.8 with meth, high comp l36 block stock cam but i have 1.95 rockers. and a fsic. i make about 12-13 psi.

you might be able to run a 3.0, 3.2, this is where having a few pulleys on hand helps out a lot, you never really know what its gonna like best. need to play with it.


do not use l36 valve springs, you want like 130 lb springs with a xp cam.
 


You must log in or register to reply here.
Back
Top