• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

NewGuy



the car has front and rear sway bars. normally they break on the creased end close to the end link. the other parts you 'might' be talking about are lateral arms.

sounds like your cat is clogged for your first issue.
 
Hey Bio248, with your help, im preety sure it's the sway bar. it broke on the passenger side, also my abs light came on and i cannot use the traction control function. Any ideas on these two.:th_laugh-lol3:
 
well the sensors are in the bearings, and you have to replace the entire hub to replace the sensor so check to make sure the wires hooked up then possibly get it scanned by someone with an ABS scanner.
 


ok, I replaced the sway bar and while I was under the car, i noticed the Stock down pipe and cat are welded. So now to cure the power surgeing problem on cold start up , Bio suggested i change out the cat. Can some give me a direction and inventory of what i will need to replace the dp and cat. I'm looking at the dp and cat welded from summitt 2.25 I/O

Thanks for your help
L8TR
 
This is the stock pipe,The dp and cat are one, two bolts at manifold and two bolts at u /resonator connection. looking for a replacement.

Thanks
 


Ok, I checked out ZZP and It looks like I need the 3" shorty or 3" w/cat? and the front and rear gaskets. Do i need a custom flange for $20. How about tools for a DIY.

Thanks, have a good one, I appreciate it.
 
You must log in or register to reply here.
Back
Top