• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Newbie looking for advice

D

dromaine

New member
Newbie to the forum and Grand Prix's. My love for Pontiacs goes back to the early 80's though. I picked up a bone stock 2001 GTP and have big plans long term but need advice and parts NOW. Wanting a cold air intake. The ZZP one looks good. Any others I should consider? I also want a catch can set up. No clue on this one. Any advice? I want an inter cooler. Again, advice? Believe me I am/ will be reading but at the same time I like to hear people's advice and learn from their experience. I'm a retired Soldier with PTSD so I'm not loaded and it saves me time and money to learn from others' experiences.

Thanks for any and all help,
Dan.
 
Last edited:


Intakes are for looks and to make your wallet suffer. Most just make there own as there is really no difference between the intake you buy for over $200 and the intake you could build for $50-80. They just don't magacially add horsepower.

Intercooler is your choice, ZZP sells a complete kit and it works or a member here sells the intercooler core and you can buy the heat exchanger and pump yourself.

Catch cans aren't really needed on these engines, they don't have much problem at all with oil consumption or a need to seperate a lot of moisture if you drive it longer than 10 minutes.
 
this ic is about the best around. http://www.grandprixforums.net/thre...your-Gen3-Gen5-M90-L67-L32-3800-s-LOOK-INSIDE

and your best to make your own cai. run ya like 45 bucks tops all parts are local. http://www.grandprixforums.net/threads/35941-DIY-Air-Intake

most of us try to avoid zzp and their prices. sadly there are some things you need to suck up and get there, but theres plenty of used parts going around as well. every last mod i have is used. bought not one thing NEW.

your gonna want headers and a tune to support the ic and smaller pulley you no doubt will be craving.

and thanks for your service :th_thumbsup-wink: :th_thumbsup-wink:
 
You must log in or register to reply here.
Back
Top