New turbo size help

[alsaiyadal]

I currently have a t4 turbo with a .70 compressor and a .84 exhaust. I would like a smaller turbo for faster spool up n a nicer spool Durring cruse as well. I want to keep the t4 flange as well. Anyone have any good turbos in mind. Idc if it's an eBay turbo or a Garretts or holset. Just an idea on size maybe I'm not sending. I've seen one that is a t4 with a .68 exhaust but it's a .80 compressor. So I just need a general idea. Please t4 flanges only

 

[alsaiyadal]

I'm not seeing.*** stupid auto correct on iPhone :th_thumb-down:

 

[MoarkatsINmuhtrailer]

Am hx35 would be a good size for what you want.

 

[alsaiyadal]

Am hx35 would be a good size for what you want.

Ive been looking and I'm not sure what The "am" is for. I'm finding which comes up as a holset? but the w are all have a waste gate. I don't need a waste gate and I've been finding them with t3 flanges as well. It looks like an awesome turbo but if u could give me a little more details what to look 4 to get this non waste gated n t4. Another thing is there is a 7 blade and 8? thanks

 

[motoglen]

i am running a HY35 on my setup. took the wastgate off and welded it closed. had to modify my zzp dp to make it fit but it worked awsome. with the hx35 its a t4 flange on the turbine. should bolt up fine. mine does spool instantly probably a little small when i start getting into the 15 psi range though. hx will go that plus