• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

New to the site and have a question

W

Weedaho

New member
So I bought the wife a nice 07 GT with the SC in it. Came with 162k on it and not knowing what all had been done to it, I decided to do a full tune up. That consisted of new brake pads on the front and rear, fresh engine oil and filter, fresh trans oil and filter, new plugs and wires,new air filter, coolant change, new stat, flushed fresh DOT4 fluid (I use it on my bikes), PS fluid change out. The only leak on the engine is the forward valve cover which isnt bad considering the mileage. I also changed out the SC oil. The throttle body was also very nasty.

I did seafoam before changing the engine oil and did some injection cleaner with 93 octane also

I still need to replace a motor and trans mount and put on new struts. I am also going to replace everything on the front end here in the next week or so. UCAs, BJs, links, ect

As you can see, Im not new to cars.

The only DTCs I have are P0753 and P0128

I will be changing out the coolant temp sensor in the morning to see if that helps. As for the P0753, I will change that shift sensor when I do my front end rebuild.

Now my only two questions are, can some one please tell me where the vac line for these two parts go? If all they need is vac, can I just connect them to the intake ports?

Image00001.jpg

Image00002.jpg

Image00003.jpg

Image00005.jpg

Image00004.jpg
 


your pics failed, so not sure what vac lines need rebuilding. that being said, you can buy new vac line and t's for about 5 or 6 bucks, and replace the lines.

not sure where you live but advance auto has the best T's i could find at any of my local stores. i got em all but o'rielys here.
 
I changed the permissions for the pics so please let me know if you can see them now.

Its not that vac lines are collapsed. That would be easy if they were. I have one not connected to anything and another module or sensor that looks like it should have one connected to it
 
you got 2 of these, one has no vac line to it? if so that normal.
Image00005.jpg



that line from the intake tube goes to the back of the sc like posted above. clean your tb with carb and choke cleaner.
 
Thanks. Yeah I have two and one has a vac line to it. TB is already cleaned. I used non-chlorinated brake cleaner.
 


You must log in or register to reply here.
Back
Top