• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

new LCA bushing



For as cheap as a new set of LCA are I would just swap the arms plus the time and effort your going to use to get the old bushings out... Yup not worth it.
 
^This^

Not only that, but you will get a brand new ball joint with the arms as well. Just order the entire Moog LCA and call it done. Once you get both sides replaced take it in for an alignment.
 
The MOOG LCA's that I installed on my GP were a bolt in. Everything was there. Just removed the ball joint nut, the 2 bolts that hold the LCA onto the cradle and out it came.
 


Getting the bushings out Is the easy part lol getting the damn ball joint out.. well that's the hard part lol... just buy a complete LCA and call it a day.. trust me it will save you a couple hours on the instal... ask me how I know haha
 
These bushings look promising at 28 bucks a bushing its not that bad. Burn the old ones out press the new ones in. Come pay day I might order these and install a grease fitting in them
 
Ya the bushings are not hard.. just press them out.. it's the ball joint that is the *****.. but if your just looking at replacing the bushings then go with those. As for quality I can vouch for them.. I replaced all mine with moog when I did my ball joints and tie rods and crap.. they are solid bushings.. just wish I would have bought the whole moog LCA to save me like 8 hours haha
 
You must log in or register to reply here.
Back
Top