• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

new exhaust style?

True, shop it in and see. Never hurts if it doesn't look good you just delete it and tell us it was a waste of time haha
 


do side exhaust like the ones on the elanor body kit
2010_mustang_gt_c_series_side_exhaust_kit_c_8048.jpg
 
Yay!!! lol No.

Side exhaust would just be silly. Besides do you really want to cut into your rockers and lower body just to get it to fit. Otherwise its just under the body scraping anything that runs in the middle of the car. Just all in all a bad idea IMO.
 


put some extra reverse lights back there like the vettes, im sure it would look ok after alot of work with fitment and body work and the right style of tips but unless your bored and can do the work or get it done cheaply it seems like a bad idea
 
Here's my quick and dirty thought based on GRAFIX's..

jjnoivlpf498wg.jpg


I was also thinking of some fins on the sides for a rear diffuser look, but I don't have time to chop that.
 


Eh, what the hell. The more I stare at it the more I can see it working out. Go to a JY, buy a cheap rear bumper and start playing. I like the last idea best with more white, but I do think you would need to get the 4" duals, 3.5" would look too small. Gotta do it right, but don't get squared ones, they would really throw off the curves and lines on the rear.

Whats the worst that could happen, you mod the other bumper, paint it, pull the tips off your exhaust and fix these up in the middle and see how it looks, if it looks good then you customize the exhaust to work to the middle.

May even consider trying the SS Center tips if you like them... they is pricey but I think it might really set off the different look and be easier to work with as they whole setup is HUGE.
93-02 Camaro SS Center Mount Exhaust Tips CME Used | eBay
$(KGrHqV,!hEF!jsPqRMiBQLTUw)wEg~~60_57.JPG


These are rough, but polished up or painted and they would look really clean against the white.
 
TLSheff said:
Yay!!! lol No.

Side exhaust would just be silly. Besides do you really want to cut into your rockers and lower body just to get it to fit. Otherwise its just under the body scraping anything that runs in the middle of the car. Just all in all a bad idea IMO.
Click to expand...

Most GP rockers are rusted, just shove it through! lol
It is a bad idea - spend the money on some mods that make sense

Maybe put 12 exhaust tips out back
 
Its a unique idea but it looks sorta rice in the PS pic but if you like it go for it. Its your car and as long as you like it thats what matter...........although we all may point and laugh at you. lol
 
I sat here for like 5 minutes thinking of something to say and i don't know, so i'll just post it....I did it in like 30 seconds so maybe if it was actually done right it might look....appropriate.
jjnoivlpf498wg.jpg


Edit: nevermind
 
It's been done.

There is a local car here with one huge oval tip.

It's gaudy looking.

Not to mention the restriction there with all the bends, unless you cut the spare tire recess out and flipped it over and welded it in upside down.
 


GTLGDP said:
jjnoivlpf498wg.jpg
Click to expand...

You cut it short in the PS. Bumper edges are low enough if you went straight across you wouldn't see the piping just the tip and I don't think it would be that bad. Definitely different but some people like different looks, doesn't make it wrong just different.

And to Nicks "Not to mention the restriction there with all the bends, unless you cut the spare tire recess out and flipped it over and welded it in upside down." 1 extra bend in the exhaust with the SS style tips wouldn't be much of a restriction, be truthful. 2 if you did the dual tips might but a higher flowing exhaust would eliminate the additional restriction from the piping so restriction wouldn't be a problem.

Its just what you want to spend the money on, its a gamble on looks but really comes down to you.
 
Dont do it. Doesnt look right on grand prixs. Stick with split, dual exhaust on the sides with ovals, trapezoids, or single/dual tips. Anything else looks ugly imo
 
Even better! Get Lexus LS460 tips & mold them into the GP bumper. I would definately subscribe to that project thread :)
 

Attachments

  • images.jpg
    images.jpg
    9.2 KB · Views: 27
You must log in or register to reply here.
Back
Top