• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

need your opinions on porting my gen v.

jim97regalgs

jim97regalgs

New member
Ok so I picked up a nice gen v at the local yard for cheap and was wondering if there would be any gain in me doing a self port nod. Mainly just open up the inlet and clean up the outlet port. Like taking out the h bar for future ic'ing. I know the gen v is already better to begin with than a ported gen 3. What and how much should I port ?
 


Nope...don't port it.

If anything just smooth out the inlet and polish both the inlet and outlet...but in its factory form it'll outflow any fully done GenIII hands down.
 
Gonna get technical on ya Nick. Won't technically outflow because they both move 90 cuibic inches of air per revolution. But yeah.. Gen V is that much better and cooler of a charge that you'll be happy no matter. plus the interior design doesn't really lend itself to you doing much.
 
"H" Bar removal...sure...if you plan on intercooling. If not, then don't worry about it...it won't yield any gains either way.

As for filling the silencer ports...I'd do it if you want metal in your engine when they break loose. I don't recommend it at all.
 
You must log in or register to reply here.
Back
Top