• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

need ur help!!! regarding a tube coming out of the engine.

drewprix86

drewprix86

New member
there is a tube that comes out of the top of my engine and goes into the large round black thing on the fire wall (drivers side). it is loose where it goes into the engine. any1 know what this is? thank you
 


15/16ths PCV hose from parts store.

get two feet of it, trim it to fit and replace that hose if thats what you're concerned about.

The line is for vacuum to the brake booster.

Which is what gives you power brakes.
 
the tube is tight. its the connector for\\rom the block to the hose thats loose and wiggles and goes in and out. ( not all the way out though thank goodness
 


got the pics. also there r 2 extra pics of these connectors that have a loose elbow joint too. all six of them. how to make them more snug?
 
here r the pics. its not the hose thats loose. its the piece it goes on. and i also notices there is a sensor above each piston ( i pointed the out in the 2 of the pics) that has the same type of elbow joint. they are all loose as in they turn and wiggle. hope the pics help man...

hose pictures by ducatidrew - Photobucket
 


i think its a rubber seal, but i could be wrong. Maybe go to the local parts store and ask. I dont have access to alldata right now, so i dont know for sure
 


You must log in or register to reply here.
Back
Top