• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need transmission help ASAP

S

ScammingL67beast

SE Level Member
How do I fix and get rid of these following fault codes
Fault codes
P1860 tcc pwm solenoid
P0758 shift solenoid b
P0753 power train shift solenoid A
And if I buy 2 shift solenoid and a tcc solenoid from zzp will that fix my issues?
 


These are all electrical codes and will all set at the same time if you have no power going to the transmission. The pcm runs functional and electrical tests on the solenoids. There is a TCC/Transmission fuse in the underhood fuse block so make sure it is not blown. If the fuse checks out OK then you need to verify there is 12v+ ignition feed at the transmission case connector. Inside the transmission this is a common 12v+ feed to all 3 solenoids and why all codes will be present if you lose power.
 
Thanks a lot I just checked it this morning and it wa blown so hopefully ityll be fixed now thank you for the help would you recommend a trans flush
 
Last edited:
You must log in or register to reply here.
Back
Top