• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

need some help pls

L

libster

New member
well i got my quick change fp from the w body store and started to install.. first off the top plastic part "i would call the hat " was lager than the stock one so the retainer would not fit over it.... no big deal just a little dremel work all set..

how do u get the retainer ring back on ive tryed everthing i can think of :confused::confused::confused::confused:
 


Are you talking about the retainer ring that you have to take off to get the whole unit out?

If so, it goes in pretty much the reverse of how you took it out. If you are having problems, you could possibly have something under the FP unit that it keeping it from seating all the way and causing it to stick up where there is not enough room for the ring.

It's hard to tell without looking at it. Let us know!!
 
A bunch of cursing and raising your hands. I caught hell trying to get the ring in my stock one. A snap ring tool helps a bunch too.
 
ive been there done that,pretty much what they are saying.u just gotta play with it.if u dont have a snap ring tool.A pair of needle nose pliers helps also.It comes out alot easier than it goes back in.
 
there is no snap ring its a metal ring with 4 slots in it that goes over 4 ears on the tank then rotates clock wise to lock as u r pushing it down to seat..
 
Ok so you should be able to put it in the reverse as you took it out. Possible the pump isint seated all the way? like someone else mentioned.
 


You must log in or register to reply here.
Back
Top