• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need More Fuel

G

GrayGhost

New member
1999 GTP Coupe 3800
Have made many mods for getting more air in/out, Sucess was acheived now need more fuel delivery.
Have had problems with dirty gas tank I will remedy this and install new pump.
Question: Does anyone know where I can get larger I.D. fuel line that will connect to fuel pump and fuel rail. Preferably from other G.M. vehicle as I have access to good Junk Yard.
 


GrayGhost said:
1999 GTP Coupe 3800
Have made many mods for getting more air in/out, Sucess was acheived now need more fuel delivery.
Have had problems with dirty gas tank I will remedy this and install new pump.
Question: Does anyone know where I can get larger I.D. fuel line that will connect to fuel pump and fuel rail. Preferably from other G.M. vehicle as I have access to good Junk Yard.
Click to expand...

The stock fuel lines, rails and FPR was used on a 600hp turbo car... I don't think upgrading the lines will help.

A fuel pump rewire should be your first mod, then injectors, then a better pump. You could do larger injectors before the rewire but the rewire is more cost effective for a little extra fuel if thats all you need. What power level are you at or your setup? Until then, we can't really help ya.
 
FoSHO99 said:
The stock fuel lines, rails and FPR was used on a 600hp turbo car... I don't think upgrading the lines will help.

A fuel pump rewire should be your first mod, then injectors, then a better pump. You could do larger injectors before the rewire but the rewire is more cost effective for a little extra fuel if thats all you need. What power level are you at or your setup? Until then, we can't really help ya.
Click to expand...

ThanKs
I estimate @ 300 using stock HP and the conservitive hp gain estimates of these mods: 2- 4" cone filters one in fenderwell behind "removed" foglight the other in normal K&N location in motor compartment area behind headlight both going to a 4" pipe and polished throttle body and Superchrger throat,3.4" pulley and very free flowing exhaust utilizing 2.5" and 2.25" piping with smooth Y transition going to almost non existant mufflers (flowmaster Knockoffs)
 
You must log in or register to reply here.
Back
Top