• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need help ticking video up

Timing

Timing

New member
so i started getting a ticking noise a couple months back. Im thinking its coming from the sc bearings. It seemed to happen right after i changed the sc oil that hadnt been changed by previous owner. Is there anyway to test this 100% like disconnect the sc? Anyway here is the vid
 


acidcrashdburnd said:
Does it get louder as you accelerate? probably your coupler.

ZZPerformance - Supercharger Coupler #ZZ-SCCPLR,
Click to expand...

it does seem to get louder as i slowly increase throttle,(although really hard to tell cus the loudness of the car)
but my original question is there a way to disconnect the supercharger so i can atleast narrow it down to that and just pull and p&p

Another thing to mention i have disconnected the belt and tested any play in pully and there doesnt seem to be any at all
 


although with the belt off you still couldnt tell if it was the sc or not cus i noticed the sc still ran when i gave it gas, right?
 
ginseng said:
although with the belt off you still couldnt tell if it was the sc or not cus i noticed the sc still ran when i gave it gas, right?
Click to expand...

If the belt is not attached and the pulley is not spinning the sc won't make any noise

Sent from my Galaxy Nexus using Tapatalk 2
 
ok so then my next step would be to take the valve covers off and run the car to see if i can locate the problem?
 


You must log in or register to reply here.
Back
Top