• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need help on Rebuild

BillBoost37 said:
You do know the two wires I'm talking about ..right?

The two you cooked when you hooked them to the starter... those two. I'd bet the cooking was bad for them.
Click to expand...

I know which 2 lol and dont bet you might be right lol i checked them they looked fine when i installed the starter again but if need be i'll splice and replace those wires

Sent from my LG-E980 using Tapatalk
 


Starter is a ok... Spark plugs were dead as f**k replaced plugs on which now my tps code is gone just a egr code now replaced fuses fuel pressure regulator even swapped icm's replaced icm relay no go any more suggestions could crankshaft position sensor be the culprit? No code for it but ive a code doesnt have to be set for it to be bad any ideas guys?

Sent from my LG-E980 using Tapatalk
 
icm coil packs (all 3) tps sensor maf sensor all off my car just to check and eliminate the guessing didnt change anything. Has plenty of fuel from the valve on the rails and new fpr. The whole no codes is throwing me for a loop too i sure dont get it either...

Checked all the fuses under the hood and swapped the 2 of the relays around no different so they were swapped back to the way they were.
 
You must log in or register to reply here.
Back
Top