• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need help installing halo headlights!!!

deadsnake

deadsnake

New member
Hey guys I am having some issues installing my halos, i have pretty much all the hardware installed in the headlight but the halos nor the projector will turn on, I do have some loose wires and a empty connector. Here are some pics

IMG_20120706_100141.jpg

IMG_20120706_100134.jpg

IMG_20120706_100125.jpg

IMG_20120706_100120.jpg

IMG_20120706_100109.jpg



thank you
 


Wow Thats a lot of spliced and linked wires. lol well it looks llike you have aa HID kit if so do you have a relay switch for them?
 
I don't see a relay switch no
I got all the lights to work minus the high beams and the rings themselves I want them working the most
 
That's how I have my leds hooked up the thin white wire is the positive and blacks are negative they hook up to my turn signal bulb for day time running lights.
11122003.jpg
 


I have a baby blue and a black wire that are cut from the power source and the black and red wires are coming from the halos themselves
 
The very thin black and red wires at the bottom of the housing go to the turn signal bulb not you're main power source for the halo lights.
The baby blue wire that is spliced from the connection is the low beam power and black ground of course the red wire is for the high beam
 
Yes just make sure it's the wire that doesn't make the turn signal blink or you will have blinking halos lol
 


Yeah but there are 3 wires if I'm not mistaken on the blinker bulb, one steady power one ground and one power wire that makes it blink.all you need to do is tap into the one that doesn't blink.
 
Went to go take a quick shot of the plug. And as you can see there is three if I'm not mistaken it should be the brown wire you need to tap for positive and black is negative
a6f5490e.jpg
 


You must log in or register to reply here.
Back
Top