Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.
Forgot to tell you guys! Ran over a Huge screw today in northland mall parking lot, felt like i was driving on train tracks suddenly, well i get to the nearest shop which is mr lube lols, my buddy works there so i trust it there anywho buddy patches my tire for $10, then tell my wife that tire wont be safe for our highway trips in the winter, i told her thats true i dont trust the tires anymore and we have a patch in the back one... she says get new summer tires! but i get smart for a second and we go home and i show her i can get rims and tires for the same price as brand new tires alone, she told em to start saving! cat wait for spring!
AND im getting a overkill tune very soon!
Having tips sticking out the back of the car just looks out of place, might be better off with a more stealth look such as the tail pipes tucked underneath the rear bumper.
when i get a resonator i dont want the car to be whisper quiet cause it essentially is stock exhuast, just for a 08 5.3l impala ss not a 05 impala 3.8 lol, so if i get a tiny resonator will that get rid of my rasp but keep some of my rumble?
when i get a resonator i dont want the car to be whisper quiet cause it essentially is stock exhuast, just for a 08 5.3l impala ss not a 05 impala 3.8 lol, so if i get a tiny resonator will that get rid of my rasp but keep some of my rumble?
Getting rid of the cat gives it more of a deep tone...the resonator doesn't really quiet it down THAT much it gets rid of all the rasp...if you went catless with a 26"~ glasspack...it'd be worth it. Trust me.
i need my cat for emissions and the ticket isnt worth it. isnt the cat good till 350 whp or sometin? so it shouldnt be holding me back anytime soon.
if it can get some horses out of a high flow cat i would this cat Ontario Quebec Club Grand Prix • View topic - High NOx Fail seems to work well emission wise.
still a bigger inlet and outlet then ours correct? would i see gains? i wouldnt do it tell i got headers then got headers and 2.5 inch all the way to the back.
well thats good, cause etest are every 2 years so i dont want to worry about my cat everytime, when i get headers ill get that cat so i can have full 2.5'' exhaust front to back and know its still almost as efffective etest wise as stock. having a slight bottleneck even though minimal it would still bug me to no end.
So my brother got the 180 tstat in today, but had a full tank of 87 octane to get out, we(my brother lol), tried d/c the main fuel line from the top of the engine and letting it pour into a bucket but when i put the key to the on position nothing happend.
well 10 minutes later he got it pouring out, i dont know what he did so i asked, he said he jumped the relay so the pump would contiously run, well w/e he did worked had the whole car empty in 20 minutes, drove his truck to the gas station got $15 in 91 octane, ill run that low do another $10 in 91 then fill up on 91 on monday when i finally get my custom tune from overkill! cant wait! i would go i higher octane then 91 but any higher octane is hard to find and i dont want to have to keep looking for gas station if im going out 8 hours + drive
I'm speaking from experience here (Been dealing with L36s since 2006.. 1995 Bonneville and my Impala) so take it with a grain of salt. I'm gonna sound like a dick but I don't know why you're so involved in the exhaust. You're driving a basically stock L36 car, you don't need anything fancy. ZZP Downpipe, 2.5 or 3.0" with the Magnaflow catalytic convertor and the U-bend delete and a 2.5" exhaust from the cat-back is all you need exhaust-wise, period. The most gains you're going to see with that engine is within the induction side of things. Without being FI, you're going to be honestly wasting your time and money otherwise. The absolute best bet to do if you're looking for a quicker car with an L36 is H/C/I and gear down. We're held back quite a way with our 3.05 FD's. There's some hidden power in a nice tune as well.
Honestly, the next best thing to start with is your suspension. To fully work it over is about 2.5G's. Drops look tight as **** on these cars. Some more agressively-valved struts and shorter, stiffer springs really do wake these cars up. I personally started with SS Sway bars front and rear, I then bought ZZP's KYB GR2/SSC drop spring combo as well as some W-body store HD Control arms .. all I have left is the rear lateral links and trailing arms. I'd like to go with the BMR stuff.. but will likely end up with the GMPP stuff.