• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My stock 2000 GTP KR results

T

The Big Al

New member
Hooked my friends Torque Pro scanner up to my stock 2000 GTP. The car has 107k miles on it and is completely stock with the exception of an Ebay air intake. Did 2 pulls from 0-95 MPH. First pull it never got over 1.5 degrees. 2nd pull it peaked at 2.1 Temperature was about 85 degrees outside. Intake temperature was 114. Elevation is around 1300 feet (Northeast Alabama). My friend tells me this is good for these cars. Sounds good to me. Guess I got lucky? IDK much about these cars. Still learning a lot. Really anxious to start modding it.
 


The 2.1 peak on the second pull was at about 80 MPH and 5,000 RPM and just for a very brief moment then it went back down to the high 1's if I remember correctly. Highest boost was 7.1. The first pull that only hit 1.5 KR was from idle to 6,000 RPM in 1st and 2nd gear.
 
Last edited:


but hes stock, so hes looking pretty good. i bet being up in the thinner air is helping. i was seeing 8* stock at sea level.
 
Scottydoggs said:
but hes stock, so hes looking pretty good. i bet being up in the thinner air is helping. i was seeing 8* stock at sea level.
Click to expand...

Ouch. Stock (yes I know different engines and SCs) the only KR I got was at the WOT 1-2 shift. Which disappointingly didn't change at all after headers so hopefully false KR, haven't scanned again after doing poly uppers though.
 
1-2* stock is nothing... Lolz like Scotty, I was seeing 8+* stock... Still see 1, 1-1/2* sometimes and not worried at all. If it blows, it blows, 3800's are plentiful :D
 
You must log in or register to reply here.
Back
Top