• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My Cutlass

T

topless94style

New member
Thought I'd post up, most of the build is done, so here are a few pics of what I've been working on since April.

20120428_133323.jpg


20120512_140708.jpg


0714121110.jpg


0819121623.jpg


0902121153.jpg
 


Thanks for the comments, more pics will come.

HID's are on the long list of wants for the car.

I went with 14" springs, wrong size obviously, car still sits at stock ride height installed. These will be promptly replaced in the spring.
 


i had a red 96. in fact, my parents still have it and my dad uses it as his daily beater car. i liked the looks, hated the power and handling. you took care of both those hot buttons.
 
With a little convincing it should clear everything... but some nice custom hood work would be kewl... unless you're going for that sleeper O.M.G.W.T.F.B.B.Q. look
 


As it sits, I don't think the hood will close, some type of adjustment will have to be made.

I have been looking into the PCV issue, and I think running a line from the oil cap to the TB is the route to go over the breather, its on there for aesthetics haha

There is a site I have bookmarked at home that sells cowl hoods for the Cutlass, its $$$$ but this car will get a full paint job / restore in a few years. After all this is a hobby, not an investment.
 
topless94style said:
I have been looking into the PCV issue, and I think running a line from the oil cap to the TB is the route to go over the breather, its on there for aesthetics haha
Click to expand...

if thats a N* TB you hook the pvc hose up to the nipple on the TB

a l67 or l32 you need to drill and tap for nipple on the TB. its where the brass plug is. its all there in that thread.
 


Couple more

20120429_094842.jpg


20120428_131617.jpg


This last one shows the ride height with the long springs installed. Its at or slightly higher than stock, I don't like it and will be getting some 12" or maybe 10" springs in the spring. The front coil overs are not complete yet.

20120528_112143.jpg
 
You must log in or register to reply here.
Back
Top