• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My Airbag Suspension Thread

The front and back will still go another 1-1.5" but that's with only 10lbs. Clearly just for sitting and not driving.

30lbs seems about a good balance between height and not damaging anything.

Sent from my Galaxy SIII on Tapatalk 2
 


Cleaned up but not waxed shot. About 20lbs.

Anyone know how to get nominated for ride of the month? :D

a5udyda6.jpg


Sent from my Galaxy SIII on Tapatalk 2
 
Good work and good looking car.
So the sways become extra parts?
I take it the car isn't your main commuter, more of a strolling car.
 
Haven't drove it yet still sitting in the driveway. I'm about to head up firestone for an alignment in just a few minutes.

Yeah sway bars are in a box with the old struts. And besides my 03 GSXR yes this is my dd. I only live maybe 1mile from work and I bought the wife a new malibu ltz last year so we use that for long trips anyways.

Sent from my Galaxy SIII on Tapatalk 2
 


That's pretty much no air in the last shot. I'm not sure if it's supposed to sit with absolutely no air.

Sent from my Galaxy SIII on Tapatalk 2
 
yeah its totally fine to sit completely aired out. You just don't want to drive with anything less than about 20 psi
 
I'll take a picture with no air as soon as they are done with the car

Sent from my Galaxy SIII on Tapatalk 2
 


rperry435 said:
It's getting washed and waxed now but here's a pic for those who wanted it last night.

Btw it's not all the way down I'm still checking line clearances

rasagejy.jpg


Sent from my Galaxy SIII on Tapatalk 2
Click to expand...
I wanna see this with the extra 1-1.5" like you promised. You can't break a promise!
 
The back tucks the wheels Into the fender. The fronts not quite but I can still use the lower mounts possibly

Sent from my Galaxy SIII on Tapatalk 2
 
Ok front is going into the upper mounts to give me a few more inches. After the alignment it doesn't go any lower in the front. I'm about to check clearance for the driveshaft in a minute.

utaqaryv.jpg




Sent from my Galaxy SIII on Tapatalk 2
 
Yeah i had to roll the rear fenders with the bat trick for the rears, and the same for the fronts if I switch mounts. I've got some friends over now for some drinks and grillin when they take off ill take a look to know what I'm going to do

Sent from my Galaxy SIII on Tapatalk 2
 


Well theres room to use the upper mounts and go lower but I'd have to do some front fender work and remove my pontiac mudflaps (rears already had to come off) because they currently sit about 3/4" off the ground when laid down.

Sent from my Galaxy SIII on Tapatalk 2
 
Rides smoother then it used too that's for sure. Obviously if its too low ill get the typical axle vibrations.

Sent from my Galaxy SIII on Tapatalk 2
 
You must log in or register to reply here.
Back
Top