• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My '05 V - Summer mode engaged



Re: My '05 V - headers and poly mounts galore

Bio248 said:
it was another $600 for the carbon one. nope. i already paid like $750 for it.

i also forgot (which just shipped) i have a new master cylinder kit to install that has a nice rebuildable tilton unit that has the correct stroke for the CTS-V so i can actually shift through the gears without having to pound it through the gate every time. apparently the stock master cylinder simply doesn't have enough volume to completely disengage the clutch. stupid.
Click to expand...

They had that issue with the LS1 F-body cars too. Nice to see some overlap.
 
Re: My '05 V - headers and poly mounts galore

i don't know how you design the master cylinder with not enough volume for a stock clutch. that's pure idiocy.
 
Re: My '05 V - headers and poly mounts galore

If it was German engineering they would device an electric vacuum pump that would add pressure to the cylinder and cost abour 2k to replace. I'll take an American saying, ''Close enough.'' Any day!
 


Re: My '05 V - headers and poly mounts galore

Still feeling like 33 pages in this thread doesn't quite deliver. What's the ETA on the headers?
 
Re: My '05 V - headers and poly mounts galore

i don't know. they usually wait for a bunch of ceramic to do all at once because they have to change the booth around to do it. they mainly do powder coating.
 
Re: My '05 V - headers and poly mounts galore

And people complained about my 11 pages of nothing.

This is just three times as bad.
 




Re: My '05 V - headers and poly mounts galore

I use GPF all the time while sitting in the library.

Hell, it even says GPF on my toilet.
 
Re: My '05 V - headers and poly mounts galore

so the emblems on the fenders are all faded and ****ty looking. my first thought was to just debadge them and be done with it.

however, i kind of like them. knowing that, the texas v club had some domed decals made for their badges and i thought they looked pretty freakin slick. i've got in contact with matt at reflective concepts who is totally cool with going down this road with me so long as i send him the emblems so that he has exact measurements and what not. that's not an issue for me, matt is awesome.

here's a picture of the texas guys' emblem:

texasvemblem_zps4c43d91a.jpg


so basically i have to figure out a cool design to work over my stockers. any cool ideas? i don't want anything dumb like a punisher skull or anything that just looks out of place on my classy car.
 
Re: My '05 V - headers and poly mounts galore

Tits? Or this.

20130801093040!Half-Life_Wiki_Logo.png


668082d1407885106-football-manager-challenges-accepted-challenge-accepted.png


I've been wanting to contact matt about making me a huge one of those for the rear window of my car lol
 
You must log in or register to reply here.
Back
Top