silenthaven
New member
are zzp mount spacers necessary for vogtland lowering springs? Also will vogtland springs get rid of my monster truck gap on my 18s?
Mount spacers needed for vogtlands
- Thread starter silenthaven
- Start date
Fivefingerdeathpunch
New member
Those are like a 1in drop or so right?
It shouldn't need them, but you'll have to find out. I was roughly 1.5in lower and needed them.
It shouldn't need them, but you'll have to find out. I was roughly 1.5in lower and needed them.
silenthaven
New member
some people have vogtland and look at least 1.7 drop... Is there a place on here to see just vogtland springs cause im getting mixed reviews.
The Guz
Active member
My brothers 03 on vogtlands and KYB AGX's. It's about an inch drop. Similar to the GMPP set up I have on mine.
http://www.grandprixforums.net/thre...and-Prix-(Polished-and-Glass-Coating-Applied)
http://www.grandprixforums.net/thre...and-Prix-(Polished-and-Glass-Coating-Applied)
silenthaven
New member
Do you have a picture?
The Guz
Active member
silenthaven
New member
did you Vogtland guys use all rubber rings/insulators? Any issues not including these?
The Guz
Active member
Yes
I would imagine metal to metal contact on the lower insulator would not be a good thing. I can't comments as I never left them off on my car or my brothers car.
silenthaven
New member
my kyb kit came with four rings seem right? a yellow ring a black plastic one a rubber ring and rubber insulator
The Guz
Active member
Ah you are referring to the strut mounts. That sounds right.