• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

More Dyno Tuning for me....video

2

2003 SSEi

New member
was able to get about 4 hours on the Dyno with the Night students in the High Performance Powertrains. The Orignal Dyno with no tuning on a 3.1 pulley put down 273.72 whp and 301 TQ

I was able to let the car cool and do alot of tuning inbetween, and of course scanning.

Mods on the car

3.0 Pulley
Gen V
Phenolic IC
60 lb injectors
SLP headers
3" catback

we were not able to get a tach signal anywhere on the car. Tried a plug wire, ICM harness, and even the balancer. NOTHING would read. SO only HP numbers.

I gained 20WHP by swapping from a 3.1 to a 3.0 pulley with out any tuning.....

final results are 302.98 WHP

enjoy the sweet Gen V 3.0 Whine

videos :: 11-18-10dynotuning.mp4 video by 1993SLE4 - Photobucket
 


at the end of your 3rd and 4th run were you hitting the rev limiter? or was the car slipping on the dyno. because the whine of the S/C going in and out really fast.

btw awesome runs
 


that things good for 12's on the stock valvetrain.... epic.

wait a minute...

why does your video say HS 1.9's but the OP doesnt... WHY?
 


You must log in or register to reply here.
Back
Top