• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Modifications

You sir are a vendors dream customer. Tells you whatever you want and you automatically believe every little bit of it. Ill sell you the pair of socks I have on right now and I guarantee they"ll add 1000hp instantly and no need to worry about your trans.
 


Headers would be worth it if you nut up and install them yourself but you don't want to but you think a turbo build is going to be easier....you'll be in for a shocker.
 
Yeah what he said. The trans on these cars go out in the 3100 powered SEs. You think a 300+ hp turbo car is not going to kill the trans? If you want to go turbo you best have at least $5k sitting around for a built trans plus all the turbo stuff, plus anything else that will probably need to be replaced.
 


anyone that tells you that you need headers to run smaller supercharger pulleys has never even attempted to without headers and is just regurgitating information they read once upon a time.
 
Bio248 said:
anyone that tells you that you need headers to run smaller supercharger pulleys has never even attempted to without headers and is just regurgitating information they read once upon a time.
Click to expand...

From what I understand, you can run a 3.6" with DP, CAI, and colder spark plugs. 3.5" or 3.4" with all of that plus headers. A tune is necessary before going smaller at all
 
A tune should be needed all the time...pulley size and flow mods don't dictate that.

Stock exhaust + E85.

Just don't need that U-Bend.
 


I see your welds...

And raise you the lazy.

is.aspx
 
Pretty damn close for a garage special.

Works worlds better than a stock or PEM would.

Then just get a front header...and weld it to the crossover?
 


remake everything exactly to the spec of the stock manifolds/crossover and then make the piping diameter a little bigger and make them tubular.

i bet it'd take someone who does exhaust a few hours to reproduce it nicely.
 
But the crossover and rear manifold don't pose any real restriction, right?

So, just need something for the front. I don't see anything really being THAT much better than an SSPLOG + 3" Downpipe.
 
blueguy said:
But the crossover and rear manifold don't pose any real restriction, right?

So, just need something for the front. I don't see anything really being THAT much better than an SSPLOG + 3" Downpipe.
Click to expand...

By the time you buy a PLOG and DP you could just get SD headers for $200 and call it done.
 
2FASTGTP said:
By the time you buy a PLOG and DP you could just get SD headers for $200 and call it done.
Click to expand...

what if you don't want the fitment issues and you want a guaranteed tried and true fit part that'll be easy to install and not have a retarded downpipe design since you want to lower the car into the pavement?
 
You must log in or register to reply here.
Back
Top